Product Name | TLM 170R |
---|---|
Brand | NEUMANN |
Sale Price | For Inquiry |
Mileage | Points :1,878.66 |
수량 | |
Product Code | P0000KOI |
Product Details | Multi-Pattern Large-Diaphragm Studio Condenser Microphone (Stereo Set, Black) |
QR Code |
Product promotion via SNS |
|
---|
Shipping Cost Payment Options: 1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture; 2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package. Product Availability: Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items. |
(Minimum Order : 1 or more / Maximum Order 0 or less)
Size ChartsTLM 170R
Multi-Pattern Large-Diaphragm Studio
Condenser Microphone (Stereo Set, Black)
Overview
The
black TLM 170 R Multi-Pattern Large-Diaphragm Studio Condenser Microphone from
Neumann is a stereo set of two large-diaphragm, multi-pattern condenser
microphones that features FET 100 technology, a balanced, transformerless
output stage, low self-noise, and an impressive dynamic range. Five directional
characteristics are selectable by means of a rotary switch. In the sixth
position, marked "R," the directional patterns can be controlled
remotely with the included N 248 power supply. There is no special cable
necessary for this purpose. The microphone has at its rear a 10 dB attenuation
switch for extremely high sound-pressure levels, and a high-pass filter to
suppress structure-borne noise. A second switch at the rear enables the mic to
attenuate the frequency response below 100 Hz to suppress undesired
structure-borne noise.The TLM 170 R can be used for many diverse applications
in professional recording studios, in broadcasting, film and television, and
for semi-professional productions.The large-diaphragm capsule inside the head
grille has a very smooth frequency response for all polar patterns over a wide
acceptance angle. The curves are flat and parallel to the 0° frequency curve up
to 10 kHz within an angle of ± 100°. As a result, the TLM 170 R has a very even
diffuse-field response for all polar patterns. This is important in a
reverberant environment, as more reflections arrive at the microphone from
different directions. The acoustic information is not affected in its tonal
quality when recorded by the microphone. This characteristic is achieved
without resorting to corrective-resonance effects.The microphone maintains an
great impulse response reproducing transient music and speech without any
coloration. The capsule is elastically mounted to avoid any structure-borne
noise that could interfere with its operation.
Features
When
compared to the standard cardioid pattern, the hypercardioid characteristic
suppresses sound from the side more efficiently. The wide-angle polar pattern
is especially useful to record large sound sources. The N 248 controls the
polar pattern remotely by varying the phantom voltage. The range is ± 3V of the
nominal 48V value. The rotary switch on the microphone must be in the position
R, remote control. In this switch position the TLM 170 R microphone analyzes
the absolute value of the phantom power and selects the corresponding polar
pattern. A standard 3-pin microphone cable is used, similar to the microphone's
conventional operation. Cable lengths may be up to 1000'. With TLM technology,
the usual output transformer is replaced by an electronic circuit. As with
traditional transformers, it ensures good common-mode rejection, and prevents
RF interference, that may influence the balanced audio signal. A tilting side
bracket to attach the microphone to booms or stands is included. The bracket is
equipped with rubber elements that effectively protect the microphone from
mechanical shock. If necessary, it can be mounted on the other side of the
microphone as well. When using the IC 4 cable, the bracket and its holder need
to be removed. The microphone can then be connected to the swivel-mount
connector of the cable. All exposed surfaces of the capsule, including the
diaphragms, are at ground potential. This technology makes them highly immune
to electrical and atmospheric interference and contamination through dust
particles.
- Local
and remote-controlled large-diaphragm microphone
- Pressure-gradient
transducer with double-membrane capsule
- Omnidirectional,
wide-angle cardioid, cardioid, hypercardioid, and figure-8 polar patterns
- Switchable
low-frequency roll-off and 10 dB pre-attenuation
- Tiltable,
elastically suspended bracket mount
Specifications
Analog Performance
Operating Principle Pressure Gradient
Transducer Condenser
Polar Pattern Cardioid, Figure-8, Hypercardioid,
Omnidirectional, Wide-Angle
Cardioid
Pattern Selection Switched
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio 68 dB CCIR
80 dB A-Weighted
Equivalent Noise Level 26 dB CCIR
14 dB A-Weighted
Maximum SPL 144 dB SPL
Pad -10
dB
THD 0.5%
Impedance 50 Ohms
Load Impedance 1000 Ohms
Sensitivity 8 mV/Pa at 1 kHz into 1 kOhms
General
Output Connectors 1 x 3-Pin XLR
Operating Current Consumption 3 µA
Operating Voltage 48 V ± 4 V
Packaging
Info
Length 5.98"
/ 152 mm
Diameter 2.36" / 60 mm
Weight 22.05
oz / 625 g
What’s In The Box
2 x
Neumann TLM 170 R Multi-Pattern Large-Diaphragm Studio Condenser Microphone
(Black)
2 x
Neumann EA170MT - Elastic Suspension Shock Mount for TLM170 and M149TUBE
Microphones (Black)
2 x
Dust Cover
Aluminum
Case
1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)
2. Payment via PayPal account : PayPal verified account is required.
3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.
4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.
5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)
For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.
*Important: All Prices in the website are subject to change without prior notice
Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.
International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.
Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.
Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products
- Shoddy Goods
Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind
* (Please contact us or Email customer service for details)
Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.
The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.
The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.
>Warranty
channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.
If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.