Product Name | TTS56A |
---|---|
Brand | RCF |
Sale Price | Php 894,000.00 |
Mileage | Points :8,940.00 |
수량 | |
Product Code | P0000TVS |
Product Details | Active Subwoofer 2 x 3,400W Amplifiers |
QR Code |
Product promotion via SNS |
|
---|
Shipping Cost Payment Options: 1."To be Paid on Delivery" Shipping is still limited to some areas in Visayas and Mindanao via AP Cargo.Shipping Cost may be paid by cash to courier (door-to-door) or upon branch pick-up. Service may expand nationwide in the nearfuture; 2."Pre-pay" Shipping covers countrywide (Philippines). Shipping cost needs to be settled with the item cost prior to shipping of the package. Product Availability: Some products are provided on a per order basis and could take 3-5 weeks to be available upon order.Kindly inquire for the availability of the items. |
(Minimum Order : 1 or more / Maximum Order 0 or less)
Size Charts
RCF TTS56 A
Active Subwoofer 2 x 3,400W Amplifiers
Overview
The TTS56-A Active Subwoofer from RCF is a powered subwoofer designed for touring sound reinforcement applications in large-scale venues such as stadiums or arenas. It features dual 3,400-watt digital amplifiers for a combined 6,800-watts RMS performance, providing up to 145 dB SPL. The TTS56-A also has 96 kHz/32-bit DSP control for time delay and remote monitoring use. Additionally, it provides presets for cardioid grouping with up to 2 other units.
2 Separated Channels
2 separate channels with independent power supplies have been provided to ensure efficiency levels and reliability for extensive use of the subwoofer during tours
32-bit Floating Point DSP
The amplifier integrates a 32-bit floating point DSP controlled through RCF's RDNet Protocol that manages crossover, equalization, time alignment and protections.
The compressor/limiter circuit on board prevents the amplifiers from clipping and avoids overdriving the transducers
Low Noise
Ultra low noise AD converters ensure the sound quality at the high output required for large events
6 Internal Fans
6 fans and a vented aluminum rear panel assure thermal dissipation
Vented Aluminum Panel
The amplifier is housed on a Vibrostop floating aluminum panel for extra protection during transportation
Input/Output
XLR Input (Balanced & Unbalanced): The system accept female XLR input connectors and line-level signals from a mixing console or other signal source
Crossover Signal Output: The output XLR male connector provides a crossover high passed signal (24 dB/octave) for satellite speakers
Signal Link XLR Output: The output XLR male connector provides a loop through for speakers daisy chaining
Data Input & Link Ethercon Connectors: The system is equipped with an RDNet connection on board to receive status information of the system and to send commands to the system
Power Panel: A separate power panel with Powercon AC connector is provided for the maximum flexibility in case a different connector must be installed
Input Board: The TTS56-A amplifier's input board includes all the controls to configure the system for every situation even from remote thanks to the Ethercon port and the RCF exclusive RDNet protocol and control software
Voice Coil
The 4.5" inside/outside voice coil is wounded on a fiberglass former for efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone
Hyper Ventilation System
In order to dissipate the heat generated by the 4.5" voice coil, RCF engineers have developed a ventilation system that offers thermal dissipation and low power compression. The Hyper Ventilation System is the result of a complex combination of holes in the voice coil former, the magnetic structure, and the woofer basket. In fact, thanks to the large excursion of the cone, the great amount of air generated is directed through the holes creating a very high level of turbulence that keeps the transducer cooler without using a forced ventilation system. With the strength of the voice coil former, obtained with the double Nomex layer, RCF engineers were able to make bigger holes without compromising the structure stiffness, therefore allowing the passage of a greater quantity of air, which would have not been possible with standard formers
Carbon Fiber Cone
The cone is composed of 30% carbon fiber, 20% fiberglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency
Double Silicon Spider
The structure has been realized with 3 layers. The central layer is made of silicon, the only material able to maintain the memory of its shape. This particular structure assures the efficiency of the suspension even after a long period of extensive use
Water-Resistant Birch
The cabinet is made of Baltic Birch plywood, with every layer glued with a water resistant adhesive that makes the cabinet completely waterproof
Polyurea Paint
The paint department inside RCF's factory in Italy utilizes a special polyurea paint to create a thick, full coating on the cabinet, making it resistant to scratches and bumps
Reinforced Grille
The front grille integrates a central reinforcement bar and is power coated. A transparent-to-sound foam backing on the inside of the grille helps to further protect the transducers from dust
Internal Structure
The internal structure of the cabinet is heavily braced to survive long term use and transportation. It presents two separate acoustic chambers for the woofers and a separate housing for the amplifier for efficiency and reliability.
Locking Points
The front of the cabinet integrates two locking points to insert and fix the wood protection cover that has been specially designed to protect the subwoofer during transportation
Rubber Feet
At the bottom 4 reinforced rubber feet ensure stability even at the most extreme volume levels.
4 powder coated aluminum slots are provided on the top to perfectly pile up other TTS56-A subs in stacking configuration
Handles
The TTS56-A is equipped with 6 handles (3 per side) made in powder coated aluminum. The handles have an ergonomic rubber hand grip to better grab the cabinet and are positioned to facilitate the transport, positioning and loading operations
Steel Bars
The back of the cabinet features two steel bars for fork-lift transportation that preserves the cabinet from being scratched
Wheels
4 threaded steel swivel wheels with high resistance rubber allows for an incredibly smooth maneuverability on any surface
Setup and Configuration
Input Sensitivity: This rotary switch controls the overall signal level at the input to the power amplifier
XLOW Cut 30/45Hz: This switch provides a high pass 24 dB/octave filtering at 30 or 45Hz. This setting is for indoor situations or when all the power shall be used in the 45 Hz - 100 Hz range
XOVER 60/90Hz: It provides either a 24 dB/octave low-pass filtering at 60 Hz or 90Hz. The same crossover frequency in high pass is available from Xover Output XLR
Time Delay Encoder: Provides a time delay setting expressed in meters
Time Delay Display: Digital display that shows the Time Delay setting
4 System Status Indicators: Power, status, signal, and limiter
Cardioid Set Up: This switch provides a special equalization and delay setting to create a cardioid pattern when the system is used in conjunction with two other TTS56-A modules
Link and Active LEDs: Indicates when the module is addressed and configured from the RDNet controller
RDNet Bypass: Pressing this switch bypasses the RDNet user setting preloaded on the module. When the RDNet controller is not connected, the by-pass switch act as follow:
By-Pass Switch pressed (LED on), the system bypass the input board and reads the last RDNet setting configuration saved;
By-Pass Switch released (LED off), the system reads the input board and by-pass the user setting eventually loaded on the speaker
RDNet Configuration: The TTS56-A is equipped with a RDNet connection on board. By using the RDNet Controller Unit is possible to:
Receive status information from the system (amplifiers status, signal levels, system settings, etc)
send commands to the system (mute, solo, change sensitivity, change setting, set user equalization, etc)
Cardioid Setup: The TTS56-A allows creating cardioid systems using groups of three stacked modules. Two modules must point in forward direction with the cardioid switch released. The central module must fire backward with the cardioid switch pressed. It is important that all three modules have the same settings (system delay, sensitivity, x-low cut, xover, etc)
Key Features
2x 3,400W Amplifiers
145 dB SPL
96 kHz/32-bit DSP
2x 21" Speakers
4.5" Voice Coil
Specifications
1. Payment by bank transfer with bank account.(ex.BDO, Metro Bank, etc)
2. Payment via PayPal account : PayPal verified account is required.
3. Payment by credit or debit card via PayPal(Visa, Master, JCB, Amex etc.) : PayPal account is NOT required.
4. Payment by credit card(Visa, Master, JCB, Amex etc.) :3D verified credit cards only are eligible for payment by credit card.
5. Payment by bank transfer without bank account.(ex.LBC, Western Union, etc)
For payment by bank transfer without bank account, the customer may pay by internet banking or telephone banking. The customer may also make payment at local banks. The name of the depositor is required to match the name registered as the depositor when placing the order. Payment shall be made within 7 days from placing the order. The order will be automatically cancelled otherwise.
*Important: All Prices in the website are subject to change without prior notice
Shipping method : LBC, 2GO, Fedex, DHL, EMS, Air21, AP Cargo, JRC, etc
Covered destinations : Nationwide
Shipping cost : may vary on destination and purchase amount
Shipping time estimate : 2~6 business days(in case of in-stock products). Order-based or imported items may take longer to ship. Please inquire by calling the store or via email whether the item is in-stock or order-based.
Shipment bound for EMS premium regions : The customer may be required to pay additional cost.
*Important : Products are to be shipped after the payment is made. Please note that shipping may take longer depending on the products of the order.
International shipments may be subject to import taxes, duties and customs fees, which are levied once your package reaches the country of destination, and are the responsibility of the recipient. In case that the customer refuses to receive the parcel, the products are to be returned to Philippines and will not be shipped again. According costs(shipping, customs and etc) are the responsibility of the customer and will be deducted from the refund.
Please make sure you have selected right options(e.g. size, color and quantity) prior to completing the order.
Once the order is completed, it is assumed that the customer agreed on our exchange/refund policy.
Exchanges and refunds are accepted only if the exchange/refund request is proven valid for the following reasons.
Eligible for exchanges and refunds:
On condition that the package (Labels, tags) of the products are intact.
- Sold out products
- Wrong item delivered
- Defective products
- Shoddy Goods
Ineligible for returns and exchanges:
- Products with customer-induced damages
- Products whose value is decreased significantly due to elapsed time or other reasons and are not in condition for re-sale
- Change of mind
* (Please contact us or Email customer service for details)
Exchange/refund procedure
For exchanges/refund, the customer is required to post an exchange/refund request on the “Q&A” board.
The request is to include the reason for exchanges/refunds and the order number.
In case of exchange/refund request due to product defects or wrong item delivered, detailed photos of the products are also required. Exchanges/refunds will be made shortly upon careful examination and confirmation on the reported defects.
The shipping costs occurring from product defects or wrong item delivered are the responsibility of the channel.com.ph.
>Warranty
channel.com.ph will repair any product under warranty at no charge or replace the unit of the exact model if deemed necessary.
If repair of returned merchandise is necessary due to neglect, damage, misuse, or improper repair by others, a charge will be made for labor, parts, and return freight.